The Lumen Subsea Light is a blindingly bright LED light for use on ROVs, AUVs, and other subsea applications. We designed this underwater light specifically for this purpose and it has a few neat features:

Using a high-efficiency Cree XLamp MK-R LED, the light outputs over 1500 lumens at 15 Watts – brighter than most car headlights! It has a 135 degree beam angle for wide illumination in front of an ROV. The color temperature is 6200K, similar to most dive lights and ROV lights.

In addition to really high brightness, the Lumen R2 is designed for very low brightness output, which is important to be able to illuminate the scene without washing out the colors or brightness. An exponential brightness curve makes it intuitive to use effectively.

It’s housed in a rugged hard-anodized aluminum enclosure with two cable penetrators at the rear, allowing it to go to a depth of 500m. The specially designed injection molded acrylic lens ensures a consistent beam angle in both air and water. The case has a built-in mounting bracket with two M3 threaded holes for mounting to your vehicle.

For those who want to use the light in other applications, like scuba diving, the light can be operated without a PWM signal. Just connect the yellow signal wire to the power wire and it will turn on! A switch can be used here to make this even more convenient.

The light operates on 10-48V inputs and can accept PWM signals from 3-48V! It is compatible with many common boards like the Arduino, Raspberry Pi, and PixHawk. The case warms up to a comfortable 55°C (131°F) when operated in air and stays much cooler in water.

Note: We recommend that you don’t look directly into this light to avoid any damage to your eyes!



BlueRobotics
Cameras and Lights
Lumen Subsea Light (Pre-Connected Sets) - Marine Thinking
Lumen Subsea Light (Pre-Connected Sets) - Marine Thinking
Lumen Subsea Light (Pre-Connected Sets) - Marine Thinking
  • SKU: LUM-SET-4-BR

Lumen Subsea Light (Pre-Connected Sets)

$1,020.00
These are pre-connected (daisy-chained) sets of Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.

    The Lumen Subsea Light is a blindingly bright LED light for use on ROVs, AUVs, and other subsea applications. We designed this underwater light specifically for this purpose and it has a few neat features:

    • Fully dimmable control using a PWM servo signal (1100-1900 μs)
    • Simple on/off control with no signal needed
    • Daisy-chainable to connect multiple lights from a single connection
    • Automatic, smart over-temperature compensation for maximum light output and safety in air
    • New in R2: Built-in mounting holes on the side of the case (M3 thread)
    • New in R2: Exponential brightness control with much lower minimum brightness output
    • New in R2: 500m depth rating

    Using a high-efficiency Cree XLamp MK-R LED, the light outputs over 1500 lumens at 15 Watts – brighter than most car headlights! It has a 135 degree beam angle for wide illumination in front of an ROV. The color temperature is 6200K, similar to most dive lights and ROV lights.

    In addition to really high brightness, the Lumen R2 is designed for very low brightness output, which is important to be able to illuminate the scene without washing out the colors or brightness. An exponential brightness curve makes it intuitive to use effectively.

    It’s housed in a rugged hard-anodized aluminum enclosure with two cable penetrators at the rear, allowing it to go to a depth of 500m. The specially designed injection molded acrylic lens ensures a consistent beam angle in both air and water. The case has a built-in mounting bracket with two M3 threaded holes for mounting to your vehicle.

    For those who want to use the light in other applications, like scuba diving, the light can be operated without a PWM signal. Just connect the yellow signal wire to the power wire and it will turn on! A switch can be used here to make this even more convenient.

    The light operates on 10-48V inputs and can accept PWM signals from 3-48V! It is compatible with many common boards like the Arduino, Raspberry Pi, and PixHawk. The case warms up to a comfortable 55°C (131°F) when operated in air and stays much cooler in water.

    Note: We recommend that you don’t look directly into this light to avoid any damage to your eyes!



    Parameter

    Value

    Electrical

    Supply Voltage (Vin)

    7 - 48 V

    Full Brightness Supply Voltage (Vin)

    10 - 48 V

    PWM Logic Voltage

    3 - 48 V

    Peak Current

    (15/Vin)  A

    Light

    Maximum Brightness

    1,500 lumens

    Color Temperature

    5,700 kelvin

    Beam Angle

    135 degrees in water

    Cable

    Cable Used

    CAB-A-3-22AWG

    Cable Length

    .7 m

    27.5 in

    Conductor Gauge

    22 AWG

    Wires

    Black - Ground


    Red - Power


    Yellow - Signal

    Installed Penetrators

    Device Side

    WLP-M06-4.5MM-LC

    Cable End

    WLP-M10-4.5MM-LC

    Physical

    Pressure Rating

    500 m

    1640 ft

    Overall Length

    78.4 mm

    3.09 in

    Overall Diameter

    37 mm

    1.46 in

    Bracket Mounting Hole Spacing

    19 mm

    0.75 in

    Bracket Screw Size

    M3

    Weight in Air (w/ 1m cable)

    118 g

    4.16 oz

    Weight in Water (w/ 1m cable)

    50 g

    1.76 oz

    Maximum Temperature when Run in Air

    55° C

    130° F

    Internals

    Face-Seal O-Ring

    AS568-019 Buna-N 70A

    Radial Seal O-Ring

    AS568-021 Buna-N 70A

    Insertion Tool for Insulation Displacement Connectors

     Kyocera AVX - 067000773001000 - Hand Tool (Digi-Key)
     Kyocera AVX - 069176701602000 - Tool Bit (Digi-Key)

    2D Drawings




    You Might Also Need

    BACK TO TOP