This Low-Light HD USB Camera is ideally suited to use underwater with excellent low-light performance, good color handling, and onboard video compression. A specially-chosen wide-angle, low distortion lens provides excellent picture quality on the ROV.

Based on the Sony IMX322 sensor, this camera uses a large sensor (1/2.9″) and a relatively low pixel count (2MP, 1080p), meaning that the physical pixel size is large to allow maximum light sensitivity. We’ve had this camera down at 300m depth, where we could see subtle bioluminescent creatures in the darkness!

The camera also has an onboard H.264 compression chip so that all of the video compression is done onboard and doesn’t place much load on the main computer. That also means that we’ll be able to support multiple cameras in the future for alternate views.

This camera is fully supported in ArduSub. Includes an 8″ USB cable with JST-PH connector.

The camera’s PCB is 32 x 32mm and works well with our Camera Tilt System. 




BlueRobotics
Cameras and Lights
Low-Light HD USB Camera - Marine Thinking
Low-Light HD USB Camera - Marine Thinking
Low-Light HD USB Camera - Marine Thinking
Low-Light HD USB Camera - Marine Thinking
  • SKU: CAM-USB-WIDE-BR

Low-Light HD USB Camera

$139.99
This digital HD USB camera has excellent low-light performance, onboard compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications.

    This Low-Light HD USB Camera is ideally suited to use underwater with excellent low-light performance, good color handling, and onboard video compression. A specially-chosen wide-angle, low distortion lens provides excellent picture quality on the ROV.

    Based on the Sony IMX322 sensor, this camera uses a large sensor (1/2.9″) and a relatively low pixel count (2MP, 1080p), meaning that the physical pixel size is large to allow maximum light sensitivity. We’ve had this camera down at 300m depth, where we could see subtle bioluminescent creatures in the darkness!

    The camera also has an onboard H.264 compression chip so that all of the video compression is done onboard and doesn’t place much load on the main computer. That also means that we’ll be able to support multiple cameras in the future for alternate views.

    This camera is fully supported in ArduSub. Includes an 8″ USB cable with JST-PH connector.

    The camera’s PCB is 32 x 32mm and works well with our Camera Tilt System. 




    Parameter

    Value

    Physical

    Camera PCB Dimensions

    32mm x 32mm

    Mounting Hole Spacing

    28mm x 28mm

    Connector

    JST-PH to USB

    Working Temperature

    -20 - 75°C

    Mass (total)

    17g

    0.6 oz

    Mass (without cable)

    13.5g

    0.48 oz

    Lens

    Mount Type

    M12 x 0.5

    Field of View (Horizontal)

    80°

    Field of View (Vertical)

    64°

    Focal Length

    2.97 mm

    Sensor

    Type

    Sony Exmor IMX322 / IMX323

    Format

    1/2.9"

    Pixel Size

    2.8µm (H) x 2.8µm (V)

    Distortion

    1%

    Total pixels*

    2000(H) x 1121(V)

    ~2.24 MP

    Recording pixels

    1920(H) x 1080(V)

    ~2.07 MP

    Minimum Illumination

    0.01 lux

    Sensitivity

    5.0V/lux-sec@550nm

    Video Stream

    Standard (min - max)

    240p15 - 1080p30

    Compression format

    H.264 / MJPEG / YUV2YUYV

    Audio Stream

    Channels

    single-channel, 44.1 kHz

    Format

    Linear-PCM (L16)

    Electrical

    Supply Voltage

    5 V

    Max Power Draw

    220 mA

    USB Version

    2.0

    2D Drawings



    You Might Also Need

    BACK TO TOP