No Products in the Cart
The Celsius temperature sensor is a fast-response, high-accuracy temperature sensor that is sealed from the water, protected by an aluminum cage, and ready to install in a watertight enclosure. Use it to make depth/temperature profiles, surface temperature profiles, and accurate measurements in any fluid.
The sensor is the Measurement Specialties TSYS01, which is accurate to ±0.1°C and communicates over I2C. It comes standard with a 4-pin DF13 connector and compatible with most DroneCode compatible boards including the APM2.6, PixHawk, and others.
The TSYS01 sensor itself has a fast time response and we designed the whole package to maintain that speed to allow accurate temperature profile measurements even while descending/ascending quickly. The Celsius sensor has a response time constant of 1 second (with 0.5 m/s flow) and 2 seconds (in still water).
An anodized aluminum cage around the sensor protects it from damage. The body of the sensor is designed around the cable penetrator design and is compatible with all of the watertight enclosures.
|
Parameter |
Value |
|
|
Electrical |
||
|
Supply Voltage |
3.3 to 5.5 volts |
|
|
I2C Logic Voltage (SDA and SCL) |
3.3 volts |
|
|
Peak Current |
1.4 mA |
|
|
Mating Connector |
||
|
Temperature |
||
|
Operating Temperature |
-40 to +125°C |
-40 to 257°F |
|
Storage Temperature |
-55 to +150°C |
-67 to 302°F |
|
Absolute Accuracy |
± 0.1°C (between -5 to 50°C) |
± 0.18°F |
|
± 0.5°C (between -40 to 125°C) |
± 0.9°F |
|
|
Pressure |
||
|
Operating Depth |
0 - 975m |
0 - 3200 ft |
|
Physical |
||
|
Recommended Through Hole Size |
10.2 mm |
13/32" |
|
Interfacing |
||
|
ArduSub Compatible? |
Yes |
|
|
Development Libraries |
||
2D Drawings
