No Products in the Cart
This cable can be used as a replacement on your BlueROV2 and it’s a great option if you’re building an ROV from scratch as well The Binder 770 connector is our standard connector for tether connections above the water. The connectors have 8 pins, are IP67 splashproof when mated, reasonably priced, and compact. This Binder 770 bulkhead connector can be mounted in a spare hole on the FXTI for your custom connections. A corresponding Binder 770 Plug is required for use.
The connector has a current rating of 2A per pin, is rated for 175V (1750V impulse), can handle >5000 mating cycles, and has gold plated pins.
Please note that the connector requires moderate soldering skills.
This cable can be used as a replacement on your BlueROV2 and it’s a great option if you’re building an ROV from scratch as well The Binder 770 connector is our standard connector for tether connections above the water. The connectors have 8 pins, are IP67 splashproof when mated, reasonably priced, and compact. This Binder 770 bulkhead connector can be mounted in a spare hole on the FXTI for your custom connections. A corresponding Binder 770 Plug is required for use.
The connector has a current rating of 2A per pin, is rated for 175V (1750V impulse), can handle >5000 mating cycles, and has gold plated pins.
Please note that the connector requires moderate soldering skills.
Parameter |
Value |
|
Termination |
Solder |
|
Wire gauge |
0.25 mm2 |
24 - 28 AWG |
Ingress protection |
IP67 |
|
Mechanical operation |
> 5000 mating cycles |
|
Temperature range |
-25°C - 85°C |
-13°F - 185°F |
Rated voltage |
175 V |
|
Rated impulse voltage |
1750 V |
|
Rated current |
2 A |
|
Contact material |
CuZn |
|
Body material |
PA (UL 94 HB) |
2D Drawings
Binder 770 Bulkhead