No Products in the Cart
This is the power cable set on the BlueROV2 that connects the battery enclosure to the main electronics enclosure. It has preinstalled WetLink Penetrators and 5.5 mm bullet connectors.
These cables use the same three-conductor cable as our thrusters and the 6.5mm version of the WetLink Penetrator that work with that cable. With three 16 AWG conductors for both positive and negative, this is equivalent to a single 11 AWG wire, providing ample copper for efficient power transmission. The cables include red and black heat-shrink to indicate polarity when installed.
This cable can be used as a replacement on your BlueROV2 and it’s a great option if you’re building an ROV from scratch as well
|
Parameter |
Value |
|
|
Physical |
||
|
Cable Construction |
CAB-PUR-3-16AWG-R2 |
|
|
Bullet Connectors |
5.5 mm Bullet |
|
|
Included Adapter |
5.5 mm bullets to XT90 |
|
|
Overall Length |
489 +- 35 mm |
19.3 in +- 1.4 in |
|
Length Between Penetrators |
258 +- 15 mm |
10.2 in +- 0.6 in |
|
In Air Assembly Weight (cable pair) |
13.2 g |
0.47 oz |
|
Performance Characteristics |
||
|
Depth Rating |
950 m |
3116 ft |
|
Design Lifetime¹ |
3 years or 500 cycles to rated depth |
|
|
Temperature Rating (air)² |
-25 to 60°C |
-13 to 140°F |
|
Temperature Rating (water)² |
-4 to 40°C |
32 to 104°F |
|
In Water Maximum Continuous Current³ |
80A |
|
|
Tools |
||
|
Recommended Bulkhead Wrench |
WL-M10-BULKHEAD-WRENCH |
|
|
Torque Specifications |
||
|
Bulkhead-Endcap or Nut-Bulkhead |
3.5 nm |
|
