This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. It is waterproof and ready to install, making it an ideal choice for ROVs, AUVs, remote sensors, and underwater instrumentation.
Compatible with ArduSub on the BlueROV2 and with Arduino and Raspberry Pi devices.
The Ping sonar is a single-beam echosounder that measures distances up to 50 meters (164 feet) underwater. A 30 degree beam width, 300 meter (984 foot) depth rating, and an open-source software interface make it a powerful tool for marine robotics. We recommend connecting with the BLUART USB to Serial and RS485 Adapter.
The Ping360 is a mechanical scanning sonar for navigation and imaging. It has a 50 meter (165 foot) range, 300 meter (984 foot) depth rating, and an open-source software interface that makes it a capable tool for ROV navigation and underwater acoustic imaging.
This wrench makes it easy to install the plug of the WetLink Penetrator, creating a high-pressure seal with your cable. It can be turned by hand or with a socket driver and we recommend using it with the WetLink Assembly Block. It’s made of hardened tool steel for a long life.
Easily and securely tighten cable penetrators and bulkheads in tight quarters with this specially designed wrench. It’s made of hardened tool steel for a long life and has a square drive socket adapter to be used with a socket wrench.
The tool holds the WetLink Penetrator bulkhead during assembly and is compatible with M06, M10, and M14 bulkhead sizes. It’s designed to fit in a vise or be bolted to a table. We recommend using it with the WetLink Plug Wrench.
The WetLink Penetrator is a compression gland cable penetrator to seal electrical cables as they pass into a device or enclosure. Each set includes a bulkhead, seal, plug, O-ring, and nut. It’s rated to 950 meter (3,116 feet) water depth when used with tested cables. We recommend the WetLink Plug Wrench and WetLink Assembly Block to ease with assembly.
The WetLink Penetrator is a compression gland cable penetrator to seal electrical cables as they pass into a device or enclosure. Each set includes a bulkhead, seal, plug, O-ring, and nut. It’s rated to 950 meter (3,116 feet) water depth when used with tested cables. We recommend the WetLink Plug Wrench and WetLink Assembly Block to ease with assembly.
The WetLink Penetrator is a compression gland cable penetrator to seal electrical cables as they pass into a device or enclosure. Each set includes a bulkhead, seal, plug, O-ring, and nut. It’s rated to 950 meter (3,116 feet) water depth when used with tested cables. We recommend the WetLink Plug Wrench and WetLink Assembly Block to ease with assembly.
